R-2186

GENERAL PURPOSE SILICONE ELASTOMER

Description

  • Two-part, translucent, pourable silicone system
  • 10:1 Mix Ratio (Part A:B)
  • Cures at room temperature or rapidly with heat
  • High tear strength and good physical properties

Applications

  • To provide protection of electronic components and assemblies against shock, vibration, moisture, ozone, dust, chemicals and other environmental hazards
  • Ideal for molding or use in O-rings, potting connectors, cable harness breakouts, molded high voltage terminals, seals and gaskets due to its high physical strength
  • For applications requiring an operating temperature range of -65 to 240°C (-85 to 465°F)

Product Details

Property Average Result
Cure System Platinum
Viscosity 83,000 cP (83,000 mPa*s)
Lap Shear 475 psi (3.28 MPa)
Durometer 30 Type A
Appearance Translucent
Cure 15 minutes / 150 °C
Dielectric Strength 640 volts/mil (24.96 kV/mm)
Elongation 450 %
Mix Ratio 10:1
Operating Temperature -65 °C / 240 °C
Specific Gravity 1.12
Tear 100 ppi (17.64 kN/m)
Tensile 1,050 psi (7.24 MPa)
Work Time 2.5 hours
Comment Legacy general all purpose adhesive. 475 psi (3.3 MPa), primed (CF1-135) lap shear.

Encapsulation Technology

Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.

Learn more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.