Implant Line

MED4-4515

HIGH CONSISTENCY SILICONE ELASTOMER

Description

  • Pre-catalyzed, high consistency elastomer
  • Medium durometer
  • Strained through a 400-mesh screen (minimum)

Applications

  • For a wide variety of fabrication techniques for the healthcare industry including: molding, calendering and extruding.
NuSil Technology’s MED4-4515 may be considered for use in human implantation for a period of greater than 29 days.

Product Details

Property Average Result
Durometer 50 Type A
Tensile 1,650 psi (11.38 MPa)
Elongation 500 %
Tear 100 ppi (17.64 kN/m)
Appearance Translucent
Cure 5 minutes / 116 °C
Cure System Peroxide
Mix Ratio 1 PART
Plasticity
Post Cure 2 hours / 249 °C
Specific Gravity 1.15
Stress at Strain 400 psi / 200 % (2.76 MPa / 200 %)
Comment Non-Vinyl Specific Peroxide Precatalyzed

Encapsulation Technology

Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.

Learn more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.