Premium Care Line

MED3-4220

FAST CURE LOW VISCOSITY SILICONE ELASTOMER

Description

  • A two-part, translucent silicone elastomer system
  • Cures at room temperature. Cure rate may be accelerated with heat.
  • Platinum addition cure
  • 1:1 Mix Ratio (Part A: Part B)

Applications

  • For use in potting, encapsulating, coating, and injection or transfer molding applications
NuSil Technology’s MED3-4220 shall not be considered for use in human implantation for a period of greater than 29 days.

Product Details

Property Average Result
Durometer 25 Type A
Viscosity 74,500 cP (74,500 mPa*s)
Work Time 15 minutes
Tensile 1,100 psi (7.59 MPa)
Appearance Translucent
Cure 30 minutes / 150 °C
Cure System Platinum
Elongation 624 %
Mix Ratio 1:1
Specific Gravity 1.11
Tear 74 ppi (13.05 kN/m)
Comment Flowable

Encapsulation Technology

Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.

Learn more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.