Premium Care Line

MED10-6615

ADDITION CURE SILICONE DISPERSION

Description

  • Two-part medium viscosity silicone elastomer dispersed in heptane
  • Cures via addition-cure chemistry
  • 1:1 Mix Ratio (Part A: Part B)

Applications

  • Suitable for dip casting and heat-curing of thin elastomeric films
  • Low viscosity makes dispersions ideal for use as sprayable coatings
  • Useful as a solvent-based adhesive
NuSil™ MED10-6615 shall not be considered for use in human implantation for a period of greater than 29 days.

Product Details

Property Average Result
Cure Type Heat Cure
Mix Ratio 1:1
Rheology Flowable / Self Leveling
Appearance Translucent
Cure 30 minutes / RTV
Cure System Platinum
Durometer 72 Type 00
Elongation 750 %
Non Volatile Content 32 %
Stress @ Strain
Substrate Primerless: Aluminum / Glass / PMMA / Silicone / With Primer: PEEK / Polycarbonate / Polyetherimide / ABS / Polyimide / Polysulphone / Polyurethane / Stainless steel
Tear 120 ppi (21.16 kN/m)
Tensile 1,060 psi (7.31 MPa)
Viscosity 65 cP (65 mPa*s)
Comment Silicone adhesive dispersed in heptane, cures rapidly with heat

Encapsulation Technology

Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.

Learn more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.