Premium Care Line

MED10-6600

ADDITION CURE SILICONE DISPERSION

Description

  • Two-part, heat curable silicone disperson
  • Cures via addition-cure chemistry
  • 1:1 Mix Ratio (Part A: Part B)

Applications

  • Suitable for dip casting and heat-curing of thin elastomeric films
  • Low viscosity makes dispersions ideal for use as sprayable coatings
NuSil Technology’s MED10-6600 shall not be considered for use in human implantation for a period of greater than 29 days.

Product Details

Property Average Result
Cure System Platinum
Viscosity 400 cP (400 mPa*s)
Non Volatile Content 35 %
Durometer 25 Type A
Appearance Translucent
Cure 30 minutes / 25 °C 45 minutes / 75 °C 135 minutes / 150 °C
Elongation 750 %
Mix Ratio 1:1
Refractive Index 1.46
Solvent Xylene
Stress at Strain 325 psi / 300 % (2.24 Mpa / 300 %)
Tear 145 ppi (25.57 kN/m)
Tensile 1,200 psi (8.28 MPa)
Comment 1.46 R.I.

Encapsulation Technology

Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.

Learn more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.