Implant Line

MED-6640

ADDITION CURE SILICONE DISPERSION

Description

  • Two-part medium viscosity silicone elastomer dispersed xylene
  • Cures via addition-cure chemistry
  • 1:1 Mix Ratio (Part A: Part B)

Applications

  • Suitable for dip casting and heat-curing of thin elastomeric films
  • Low viscosity makes dispersions ideal for use as sprayable coatings
NuSil Technology’s MED-6640 may be considered for use in human implantation for a period of greater than 29 days.

Product Details

Property Average Result
Cure System Platinum
Viscosity 3,000 cP (3,000 mPa*s)
Non Volatile Content 20 %
Durometer 40 Type A
Appearance Translucent
Cure 30 minutes / 25 °C 45 minutes / 75 °C 135 minutes / 150 °C
Elongation 1,000 %
Mix Ratio 1:1
Refractive Index 1.41
Specific Gravity 1.41
Stress at Strain 150 psi / 100 % (1.03 MPa / 100 %)
Tear 300 ppi (52.91 kN/m)
Tensile 1,700 psi (11.72 MPa)
Work Time 24 hours
Comment Ultra High Tear, in Xylene

Encapsulation Technology

Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.

Learn more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.