Premium Care Line

MED-4174

SILICONE ELASTOMER

Description

  • An uncatalyzed high consistency material
  • Catalyze with various peroxides to form a medium durometer rubber
  • Strained through fine mesh stainless steel screens to ensure freedom from particulate contamination

Applications

  • For fabricating molded and extruded silicone rubber parts
NuSil Technology’s MED-4174 shall not be considered for use in human implantation for a period of greater than 29 days.

Product Details

Property Average Result
Durometer 50 Type A
Tensile 1,200 psi (8.28 MPa)
Elongation 775 %
Tear 225 ppi (39.68 kN/m)
Appearance Translucent
Cure 5 minutes / 116 °C
Cure Rate Scorch 0.55 minutes
Cure Rate T90 1.7 minutes
Cure System Peroxide
Mix Ratio 1 PART
Plasticity
Post Cure 4 hours / 205 °C
Specific Gravity 1.15
Stress at Strain 325 psi / 200 % (2.24 MPa / 200 %)
Comment Uncatalyzed

Encapsulation Technology

Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.

Learn more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.