Premium Care Line

MED-4135

HIGH CONSISTENCY SILICONE ELASTOMER

Description

  • Uncatalyzed, vinyl-functional, high consistency silicone elastomer
  • Low durometer
  • Requires the addition of a peroxide catalyst to accomplish vulcanization
  • Strained through a 400-mesh screen (minimum)

Applications

  • For a wide variety of fabrication techniques for the healthcare industry including: molding, calendering and extruding
NuSil Technology’s MED-4135 shall not be considered for use in human implantation for a period of greater than 29 days.

Product Details

Property Average Result
Durometer 35 Type A
Tensile 1,250 psi (8.62 MPa)
Elongation 800 %
Tear 110 ppi (19.4 kN/m)
Appearance Translucent
Cure 5 minutes / 116 °C
Cure Rate Scorch 0.55 minutes
Cure Rate T90 2.1 minutes
Cure System Peroxide
Mix Ratio 1 PART
Plasticity
Post Cure 2 hours / 177 °C
Specific Gravity 1.1
Stress at Strain 190 psi / 200 % (1.31 MPa / 200 %)
Comment Uncatalyzed

Encapsulation Technology

Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.

Learn more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.