Premium Care Line

MED-4070

UHP HIGH CONSISTENCY SILICONE ELASTOMER

Description

  • Two-part, ultra high properties silicone elastomer
  • Cures with heat via addition-cure chemistry
  • Has a non-tacky surface and no volatile by-products or peroxide residues
  • Strained through a 400-mesh screen (minimum)
  • 1:1 Mix Ratio (Part A: Part B)

Applications

  • For a wide variety of fabrication techniques for the healthcare industry including: molding, calendering and extruding
  • For applications requiring high physical properties and fatigue and abrasion resistance
NuSil Technology’s MED-4070 shall not be considered for use in human implantation for a period of greater than 29 days.

Product Details

Property Average Result
Durometer 70 Type A
Tensile 1,430 psi (9.86 MPa)
Elongation 750 %
Tear 300 ppi (52.91 kN/m)
Appearance Translucent
Cure 10 minutes / 138 °C
Cure Rate Scorch 0.9 minutes
Cure Rate T90 2.7 minutes
Cure System Platinum
Mix Ratio 1:1
Plasticity
Post Cure 4 hours / 177 °C
Special Feature
Specific Gravity 1.19
Stress at Strain 600 psi / 200 % (4.14 MPa / 200 %)
Work Time 2 hours
Comment Abrasion / Fatigue Resistant

Encapsulation Technology

Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.

Learn more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.