Premium Care Line

MED-4035

HIGH CONSISTENCY SILICONE ELASTOMER

Description

  • Two-part, high tear strength silicone elastomer
  • Soft silicone
  • Cures with heat via addition-cure chemistry
  • Has a non-tacky surface and no volatile by-products or peroxide residues
  • Strained through a 400-mesh screen (minimum)
  • 1:1 Mix Ratio (Part A: Part B)

Applications

  • For a wide variety of fabrication techniques for the healthcare industry including: molding, calendering and extruding
NuSil Technology’s MED-4035 shall not be considered for use in human implantation for a period of greater than 29 days.

Product Details

Property Average Result
Durometer 35 Type A
Tensile 1,565 psi (10.79 MPa)
Elongation 1,055 %
Tear 195 ppi (34.39 kN/m)
Appearance Translucent
Cure 10 minutes / 116 °C
Cure System Platinum
Mix Ratio 1:1
Plasticity
Specific Gravity 1.11
Stress at Strain 195 psi / 200 % (1.34 MPa / 200 %)
Work Time 2 hours
Comment High Tear Strength

Encapsulation Technology

Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.

Learn more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.