Implant Line

MED-2174

HIGH CONSISTENCY SILICONE ELASTOMER

Description

  • Uncatalyzed high consistency elastomer
  • Catalyze with various peroxides to form a medium durometer rubber
  • Strained through a 400-mesh screen (minimum)

Applications

  • For a wide variety of fabrication techniques for the healthcare industry including: molding, calendering and extruding
NuSil Technology’s MED-2174 may be considered for use in human implantation for a period of greater than 29 days.

Product Details

Property Average Result
Durometer 50 Type A
Tensile 1,300 psi (8.97 MPa)
Elongation 750 %
Tear 225 ppi (39.68 kN/m)
Appearance Clear
Cure 5 minutes / 116 °C
Cure System Peroxide
Mix Ratio 1 PART
Plasticity
Post Cure 4 hours / 205 °C
Specific Gravity 1.15
Stress at Strain 325 psi / 200 % (2.24 MPa / 200 %)
Comment Uncatalyzed

Encapsulation Technology

Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.

Learn more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.