FS-3511

LIQUID INJECTION MOLDING FLUOROSILICONE ELASTOMER

Description

  • Two-part, translucent, fluorosilicone elastomer used with liquid injection molding equipment
  • 1:1 Mix Ratio (Part A: Part B)
  • Cures rapidly with heat
  • 100 mol % fluorosilicone

Applications

  • For components exposed to JP-8, aviation fuels and solvents
  • For applications requiring a medium hardness silicone with solvent resistance
  • Some typical applications include O-rings, gaskets, seals, and precision molded parts
  • Excellent for molding high quality parts at rapid rates

Product Details

Property Average Result
Cure System Platinum
Durometer 40 Type A
Tensile 1,150 psi (7.93 MPa)
Elongation 335 %
Tear 60 ppi (10.58 kN/m)
Appearance Translucent
Cure 30 minutes / 150 °C
Extrusion Rate 35 g/minute
Mix Ratio 1:1
Specific Gravity 1.39
Work Time 24 hours
Comment LSR Fluoro Elastomer;For long term fuel or solvent exposure. Can be liquid injection molded and requires heat to cure. Recommend SP-120 or SP-201

Encapsulation Technology

Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.

Learn more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.