EPM1-2493

LOW VOLATILITY THERMALLY CONDUCTIVE SILICONE ELASTOMER

Description

  • Two-part, white, thermally conductive, low viscosity silicone elastomer
  • Cures with the addition of heat
  • 1:1 Mix Ratio (Part A: Part B)

Applications

  • For applications requiring a low volatility, conformal, thermally conductive silicone
  • To provide heat transfer between electrical/electronic components and their heat sinks
  • Use to adhere integrated circuit substrates, base plates, heat sinks or where grooves or other configurations require a limited flow material

Product Details

Property Average Result
Thermal Conductivity 0.95 W/(mK)
Viscosity 36,000 cP (36,000 mPa*s)
Cure System Platinum
Tensile 180 psi (1.24 MPa)
Appearance White
Cure 14 minutes / 150 °C
Dielectric Strength 465 volts/mil (18.14 kV/mm)
Durometer 65 Type A
Elongation 50 %
Ionic Content Cl <5 ppm
Ionic Content K <3 ppm
Ionic Content Na <5 ppm
Lap Shear 120 psi (0.83 MPa)
Mix Ratio 1:1
Specific Gravity 2.34
Tack Free Time 13 hours
Volatile Content 0.35 %
Volume Resistivity 34,000,000,000,000 ohmcm
Comment Recommended for bondlines 5 micron or greater.

Encapsulation Technology

Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.

Learn more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.