EPM-2490

LOW VOLATILITY THERMALLY CONDUCTIVE SILICONE ADHESIVE

Description

  • Two-part, white, thermally conductive, electrically insulating, silicone system
  • Electrically insulative and non-corrosive
  • 15:1 Mix Ratio (Part A: Part B)

Applications

  • Flexible Thermal interface material (TIM) designed to provide heat transfer between electrical/electronic components and their heat sinks for a variety of component level packaging
  • For applications requiring a broad operating temperature range
  • Ideal where a form-in-place TIM is needed for use as a sealing, caulking, adhesive, or potting material in electronics applications requiring minimal volatility for prevention of contamination in sensitive devices

Product Details

Property Average Result
Thermal Conductivity 1.49 W/(mK)
Viscosity 3,672,800 cP (3,672,800 mPa*s)
Cure System Platinum
Tensile 200 psi (1.38 MPa)
Appearance White
Durometer 75 Type A
Elongation 30 %
Flow Rate 0.3 in (7.62 mm)
Ionic Content Cl <3 ppm
Ionic Content K <3 ppm
Ionic Content Na <6 ppm
Lap Shear 160 psi (1.1 MPa)
Mix Ratio 15:1
Specific Gravity 1.53
Tack Free Time 4.5 hours
Tear 50 ppi (8.82 kN/m)
Work Time 2 hours
Comment 1.5 W/mK, 160 psi lap shear primed w/CF1-135, 2 hr. pot life. (Contains Boron Nitride)

Encapsulation Technology

Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.

Learn more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.