CV3-1161

CONTROLLED VOLATILITY PRESSURE SENSITIVE SILICONE ADHESIVE

Description

  • Two-part pressure sensitive adhesive
  • Retains adhesive qualities in the presence of minor liquid and particulate contaminants
  • Properties unaffected by normal pressure variations and high temperature exposure
  • 100:1 Mix Ratio (Part A solids: Part B))

Applications

  • For adhering and bonding silicone elastomers, metals, paper, glass, fabric, organic rubbers, some synthetics, and films such as polyester or Kapton
  • For applications requiring low outgassing and minimal volatile condensables materials
Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%

Product Details

Property Average Result
Cure System Peroxide
Non Volatile Content 40 %
Appearance White
Cure 20 minutes / 85 °C
Mix Ratio 100:1
Post Cure 20 minutes / 175 °C
Viscosity 1,300 cP (1,300 mPa*s)
Comment Clear silicone PSA for adhering and bonding silicone elastomers, metals, paper, glass, fabric, organic rubbers, some synthetics. Excellent for tapes on films such as polyester or kapton.Rlease force of PSA: 1.5 ppi. Same as CV-1161 with peroxide catalyst to reduce flow at higher temperatures. Recommended where low VOCs are of concern.

Encapsulation Technology

Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.

Learn more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.