CV10-2500

CONTROLLED VOLATILITY SILICONE

Description

  • Two-part, optically clear silicone system
  • Convenient 1:1 mix ratio (Part A:B)

Applications

  • For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions
  • As an embedding or potting compound for electronic assemblies and components to provide protection from extremes humidity, radiation, thermal stress and mechanical stress
  • As an adhesive in low-strength applications such as solar cell arrays where clarity and low volatility are important
Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%

Product Details

Property Average Result
Cure System Platinum
Viscosity 7,500 cP (7,500 mPa*s)
Lap Shear 360 psi (2.48 MPa)
Durometer 50 Type A
Appearance Clear
Cure 15 minutes / 150 °C
Elongation 130 %
Mix Ratio 1:1
Specific Gravity 1.02
Tack Free Time 5 hours
Tensile 1,000 psi (6.9 MPa)
Work Time 3 hours
Comment High Durometer, Optically Clear

Encapsulation Technology

Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.

Learn more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.