CV-2961

THERMALLY CONDUCTIVE, CONTROLLED VOLATILITY SILICONE

Description

  • Two-part, white, thermally conductive silicone
  • Cures with the addition of heat
  • Mix Ratio 10:1 (Part A:B)
  • Designed for enhanced performance in extreme low and high temperatures

Applications

  • For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions to avoid condensation in sensitive devices
  • To provide moderate heat transfer between electrical/electronic components and their heat sinks
  • Use for adhering openings in modules and housings where grooves or other configurations require a limited flow material
  • For applications requiring a broader operating temperature range
Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%

Product Details

Property Average Result
Thermal Conductivity 0.79 W/(mK)
Viscosity 300,000 cP (300,000 mPa*s)
Cure System Platinum
Tensile 275 psi (1.9 MPa)
Appearance White
Cte
Cure 30 minutes / 150 °C
Durometer 75 Type A
Elongation 40 %
Lap Shear 205 psi (1.41 MPa)
Mix Ratio 10:1
Specific Gravity 1.38
Tack Free Time 3.5 hours
Tear 45 ppi (7.94 kN/m)
Work Time 2 hours
Comment *22) 0.8 W/mK Low Viscosity, *3) Primed Lap Shear 205 psi (1.4 MPa), Low Temp

Encapsulation Technology

Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.

Learn more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.