CV-2946

THERMALLY CONDUCTIVE, CONTROLLED VOLATILITY SILICONE

Description

  • Two-part, white, thermally conductive silicone
  • Cures with the addition of heat
  • 15:1 Mix Ratio (Part A:B)

Applications

  • For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions to avoid condensation in sensitive devices
  • To provide heat transfer between electrical/electronic components and their heat sinks
  • Use to adhere integrated circuit substrates, base plates, heat sinks or where grooves or other configurations require a non-flowable to limited flow material
Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%

Product Details

Property Average Result
Thermal Conductivity 1.49 W/(mK)
Viscosity 3,560,000 cP (3,560,000 mPa*s)
Cure System Platinum
Tensile 200 psi (1.38 MPa)
Appearance White
Cure 7 days / RTV
Dielectric Strength 540 volts/mil (21.06 kV/mm)
Durometer 75 Type A
Elongation 30 %
Lap Shear 160 psi (1.1 MPa)
Mix Ratio 15:1
Specific Gravity 1.53
Tack Free Time 4.5 hours
Tear 50 ppi (8.82 kN/m)
Volume Resistivity 530,000,000,000,000 ohmcm
Work Time 2 hours
Comment *22) 1.5 W/mK *,4 ) Primed Lap Shear 160 psi (1.1 MPa)

Encapsulation Technology

Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.

Learn more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.