CV-2900

THERMALLY CONDUCTIVE CONTROLLED VOLATILITY SILICONE ADHESIVE

Description

  • One-Part, white RTV silicone
  • Non-slumping in thin sections
  • Non-corrosive
  • Designed for enhanced performance in extreme low and high temperatures

Applications

  • For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions
  • To provide moderate heat transfer between electrical/electronic components and their heat sinks
  • As a sealing, caulking, adhesive or potting material in electronics and space applications requiring minimal outgassing to avoid condensation in sensitive devices
  • For bonding and sealing in applications such as overhead or vertical joints that require a non-slumping and one-part material
  • For applications requiring a broader operating temperature range
Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%

Product Details

Property Average Result
Thermal Conductivity 0.61 W/(mK)
Extrusion Rate 40 g/minute
Cure System Oxime
Tensile 400 psi (2.76 MPa)
Appearance White
Cte
Cure 72 hours / RTV
Durometer 65 Type A
Elongation 150 %
Ionic Content Cl <5 ppm
Ionic Content K <5 ppm
Ionic Content Na <5 ppm
Mix Ratio 1 PART
Specific Gravity 2.33
Tack Free Time 40 minutes
Comment *22) 0.6 W/mK, Low Temperature

Encapsulation Technology

Watch our CareSil team explain the breakthrough Encapsulation Technology and demonstrate how easy it is to create transformative formulations with CES.

Learn more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.